How Do I Fill In The Title Template On Scrivener

Is Scrivener a Book Formatting Software?
Footstep 1: Prep Your Manuscript
- Templates
- Manuscript Organisation
- Front and Back Thing
Step ii: Choose Your Format
Footstep 3A: Formatting an EPUB Volume in Scrivener
Step 3B: Formatting a Impress Book in Scrivener
- Margins
- Trim Size
Step 4: Check Additional Information
- Metadata
- Front and Back Affair
Step v: Assign Section Layouts
Step 6: Compile and Check

Scrivener is known equally one of the almost powerful volume writing software on the market place. Just did yous know that you lot tin can also format a book using information technology?

In fact, information technology's a better word processor than many others, such as Microsoft Give-and-take, at formatting the finished manuscript.

All the same, Scrivener is a complex if powerful program, and information technology's almost impossible to figure out how to format a book with Scrivener on your own. Let us to help.

In this article, y'all volition larn:

Scrivener'south capabilities for formatting
How to format your book in Scrivener
What elements you should include

Is Scrivener a Book Formatting Software?

Yes and no. While Scrivener was not built as a formatting software, it has acquired a lot of functionality in later releases, peculiarly in Scrivener 3.

While a lot more than complicated than programs like Vellum or Atticus, information technology is also quite powerful, and tin can do virtually anything that either alternative tin do.

The only downside is that sometimes information technology can require a mountain of tutorials, video trainings, and experimentation to get it just correct.

But it can be done. It's only not every bit intuitive as our primary recommendation: Atticus. If you oasis't checked that out already, take a look at our comprehensive review.

Pace 1: Prep Your Manuscript

The commencement footstep in formatting your novel is to ensure that the manuscript is prepped correctly. This will simplify the compiling stride subsequently.

Templates

Offset, when y'all are but setting up your Scrivener project, yous should make sure to select the Novel template, if that is what you're doing, but there are built-in templates for Non-fiction and several variations of both.

Note: while there are many templates to choose from, we are going to continue this tutorial using the Novel template. Once y'all know how to format your novel, information technology is relatively easy to accommodate these steps to non-fiction or other types of books.

Manuscript Organization

At that place are a few uncomplicated steps that should happen while you lot are writing your book. These include:

Getting your scenes and chapters in society
Arranging the bureaucracy and tabular array of contents
Ensuring each chapter is complete and set up to publish

Front end and Back Matter

The Novel Scrivener template volition come with these, just if not, all you accept to practise is create folders titled Front Matter, and Back Affair, respectively. You can then add together whatever content you intend to include in either.

A useful characteristic here is that you tin besides setup sub-folders inside your front and dorsum matter folders, one for ebooks and one for print books. This style yous can take forepart and back matter that is specific to each format.

While you prep your manuscript, this is all you lot will need to practice here, simply this step will be important afterward on during compiling.

Stride 2: Cull Your Format

Once y'all have your manuscript ready to go, information technology's fourth dimension to format it for either ebook or print. There are other ways to format, but nosotros'll stick to these two for the purposes of this article. Rarely will you need anything else.

To start, get to File > Compile. In that location y'all will see a dropdown at the top of the pop-upward window that says "Compile For:"

If y'all are looking to format for an ebook, select "ePub 3 Ebook (.epub)"
If you are looking to format for a print version (for uploading to KDP Print or IngramSpark, for example), select "PDF".

Once you take selected either of these, you will come across a multifariousness of formats listed on the left-hand side. Select the i yous desire and correct-click or hit the plus sign at the bottom.

Select "Duplicate & Edit Format"

This will and so bring up another popular-upward window with boosted compile settings for each type. Allow's walk through each of these.

Footstep 3A: Formatting an EPUB Volume in Scrivener

EPUBs are relatively easy to put together. After you've selected the correct format and duplicated information technology, you'll need to rename the preset and save it nether "My Formats". This will enable you to edit and use the aforementioned format again if needed.

There are few modifications you need to make to this format, unless you lot have very specific needs that are not covered in this tutorial.

That said, hither are some boosted concerns you lot may need to address when compiling to an EPUB.

EPUBs need a embrace epitome. The basic Novel template that comes with Scrivener volition provide a dummy image in the Front Affair of the book, which makes the most sense. Simply swap out that prototype for ane of your ain.
You simply need to worry most an EPUB file when compiling for an eBook. MOBI is another file that was previously used past Amazon. Scrivener still supports information technology, just yous most likely will not demand to consign to MOBI in club to create a kindle book.
An EPUB should also have a tabular array of contents included in scrivener file. The template yous are using, assuming you copied it from the standard EPUB template, should have what you lot need here. However, it always pays to bank check the last file and ensure that the table of contents is there.

While you volition need to check your kindle book for errors, there is not much that you will likely need to change.

Step 3B: Formatting a Impress Book in Scrivener

Setting up the print version will take a bit more work when establishing the formatting guidelines.

Start in the compile window by selecting PDF in the "Compile For" dropdown, and then select and duplicate one of the formats on the left side. Currently, Scrivener but has 2 main paperback formats commonly used in KDP Print and IngramSpark: 5.06" 10 7.81" and half-dozen" x 9".

For this tutorial, we selected the 6" x ix" paperback and duplicated information technology.

Next, be sure to rename it and list it under "My Formats".

We renamed ours as Paperback (v" x viii") because this is the format that we wanted to create.

Next nosotros need to edit that format and select "Page Settings" from the edit menu. At the tiptop of these settings you'll encounter Page Setup and Margins. These will exist important in formatting your book.

Margins

For margins, you volition need to know the right layout for whatever volume you are trying to produce. This usually involves articulate margins on all sides, and an extra-large margin in the inside margin or "gutter" margin.

Trim Size

Trim size is the overall height and width of your book. There are a variety of trim sizes, and you'll need to adjust them here, unless you're looking for the half dozen" x 9" format that is already included in Scrivener.

See Amazon's guidelines for how you should adjust your margins and trim size for KDP.

Step iv: Check Boosted Data

There are a number of additional areas that you should check before compiling, to ensure that you're roofing all your bases.

Metadata

Metadata is a crucially important step, because the slightest typo tin easily hateful that your volume's proper name is spelled wrong across every page of your print book, for example.

Note: the metadata is not the same equally the Championship Page of your book, which y'all should have setup in the initial manuscript. Instead, the metadata is what Scrivener uses along the headers or footers of your book.

You can find the metadata in the compile settings on the right-hand side, where you'll see a number of small icons. Click the one that looks like a small tag.

That brings up a new fix of options that include your book'due south proper noun and the author's name.

Front end and Dorsum Matter

In the compile settings, you'll come across on the bottom-right, a identify to add together front or back matter. In that location volition be a dropdown available for each that will allow y'all to select where these come from.

This is why it'due south of import to have this setup earlier while yous're amalgam your novel. If you've done this properly, all you demand to do is select the appropriate folder. If you've created folders specifically for ebook or print versions, you should select the advisable one here.

Step five: Assign Section Layouts

One of import step before you compile is to assign section layouts. This area is quite different in Scrivener 3 than in previous versions.

At the bottom-heart of the compile settings is a button that says "Assign Section Layouts". Click on this and you'll see a listing of department types, along with layouts for each i. This is where you'll select the pattern for each "department" or chemical element of your volume.

For a fiction book, these sections are pretty standard. They include things like Chapter Headings, Scenes, Front Affair, Role Headings, Table of Contents, etc.

The nice things almost Scrivener's section layouts is that if y'all modify the style for 1 chemical element, it will change it for all matching elements. That ways that all your Chapter Headings, for example, will look compatible.

Make certain that each section type has an assigned section layout. Simply scan through what they take and select what looks proficient. Then striking OK.

Step 6: Compile and Bank check

Lastly, it's time to compile and check your file. From the compile settings, just hit compile, and Scrivener will produce a file for you.

Ebooks can be checked through an ebook reader software like Calibre.
Print books tin can be checked with whatsoever PDF reader.

Considering Scrivener is such a complicated program, you lot will likely find elements of your volume that you will desire to alter. Peradventure you lot don't similar the font, or you need to adjust the margins, or your table of contents is not showing upwards the way y'all expected.

There volition undoubtedly be some tweaking that will need to be done. But the proficient news is that almost all of this can exist washed from Scrivener's compile settings. Simply get to File > Compile, find your specific book format, and play around with it until you have what you need.

You lot'll have your volume in the hands of readers in no time!