How To Get A Youtube Video To Autoplay In Powerpoint

You tin can use the playback options in PowerPoint to command how and when a video appears in your presentation. You tin play a video in total screen style or resize it to dimensions that you specify. You tin can besides control the volume, play the video repeatedly (in a loop), and show the media controls.

These Play options aren't available for online videos, such as YouTube videos. They are only bachelor for videos inserted from your computer, network, or OneDrive.

To control how your video plays, use options on the Playback tab of the PowerPoint ribbon. This tab appears on the ribbon when a video is selected on a slide.

(These options for a video are bachelor subsequently y'all embed or link to a video file from your reckoner.)

Play a video in the click sequence, automatically, or when clicked

Important:Set this option earlier adding whatsoever animations or triggers to your video. Past changing this option, you will remove any animations that are associated with your video.

1. In Normal view, click the video frame on the slide.

2. On the Playback tab, in the Video Options group, from the Outset listing, select an option:

   

   Option	When the video plays during a slide show
   Automatically	The video plays automatically when the slide appears.
   On Click or When Clicked On	The video only plays when you click inside the video frame.
   In Click Sequence	The video plays in sequence with other actions you've programmed on the slide (such every bit animation furnishings). This option doesn't require a literal click. You can trigger the video to brainstorm with a clicker or whatever other mechanism that activates the next activity on the slide (such every bit pressing the right arrow key). (This option is bachelor in PowerPoint for Microsoft 365 and PowerPoint 2019. Information technology's as well available in PowerPoint 2016 version 1709 or later.)

   Tip:While a video is playing, you tin pause it past clicking it. To resume playing the video, click information technology again.

Play a video full screen

You can play a video then that it fills the entire slide (screen) when you deliver your presentation. Depending on the resolution of your original video file, information technology might appear distorted when you enlarge it. Ever preview your video earlier you lot include it in your presentation so that if the video appears distorted or blurry, you tin undo the full screen selection.

If you set up the video to be displayed full screen and it is also set to first automatically, you can elevate the video frame off the slide into the gray area so that information technology will not be visible on the slide or flash briefly before the video goes to full screen.

1. In Normal view, click the video frame on the slide that you want to play full screen.

2. Under Video Tools, on the Playback tab, in the Video Options group, select the Play Full Screen bank check box.

Resize a video

If you don't want to play a movie total screen, you can resize it to the dimensions that you want.

1. In Normal view, select the video that you want to resize.

2. Do ane of the post-obit:

   To adjust the formatting:

   • Click a corner sizing handle until you lot see a ii-headed arrow, and so drag to size the frame.

     

     • To go on the center of the video in the aforementioned place, concord downwardly Ctrl while dragging. Past default, this maintains the proportions (locks the aspect ratio) of the video as yous elevate.

     • Typically, well-nigh videos with a 640 ten 480 resolution accept a 4:3 aspect ratio, which is also the default aspect ratio for PowerPoint 2010 presentations. The default aspect ratio for presentations in PowerPoint 2013 and newer versions is sixteen:ix. If the attribute ratios of the presentation and the video differ, your video will expect distorted when information technology plays.

   To specify precise pinnacle-to-width proportions of a video:

   1. Under Video Tools, on the Format tab (PowerPoint 2013 or newer versions) or Options tab (PowerPoint 2010), in the Size group, click the Dialog Box Launcher .

   2. Click Size, and so under Scale, select the Lock attribute ratio check box.

   3. Nether Size and rotate, enter sizes in the Superlative and Width boxes, or under Scale, in the Calibration Acme and Scale Width boxes, enter the percentage of size that you want, relative to the video'southward original size.

      Tip:To prevent videos from skipping when they are played, under Scale, select the Best calibration for slide evidence check box.

Preview a video

• In Normal view, click the video frame.

• Click Play.

  There is besides a Play choice in the Preview group, on both the Format and Playback tabs, under Video Tools.

Set the volume of a video

• Nether Video Tools, on the Playback tab, in the Video Options grouping, click Book, and then choose 1 of the following:

  • Low

  • Medium

  • Loftier

  • Mute

    Tip:Yous can also set the volume by using the volume slider on the play command bar.

Hide a video when not playing

While delivering your presentation, yous tin hide your video until you are ready to play it. However, y'all should create an automated or triggered animation to initiate playback or you will never see the video play during the slideshow. For more than data about creating an automatic or triggered animation, see Animate text or objects.

• Under Video Tools, on the Playback tab, in the Video Options group, select the Hide While Non Playing check box.

Loop a video

To play your video repeatedly and continuously during your presentation, you lot can use the loop characteristic.

• Under Video Tools, on the Playback tab, in the Video Options grouping, select the Loop until Stopped check box.

Rewind a video afterwards playing

To rewind your video after playing during your presentation, do the following:

• Nether Video Tools, on the Playback tab, in the Video Options grouping, select the Rewind subsequently Playing check box.

Prove the media controls

To prove the media controls during your presentation, do the post-obit:

• On the Slide Evidence tab, in the Prepare group, select the Show Media Controls check box.

To control how your video plays, employ options on the Playback tab of the PowerPoint ribbon. This tab appears on the ribbon when a video is selected on a slide.

(These options for a video are bachelor after you embed or link to a video file from your computer.)

Play a video automatically or when clicked

Tip:Prepare this pick before calculation any animations or triggers to your video. Changing this option removes any animations that are associated with your video.

1. In Normal view, click the video frame on the slide.

   

   Figure: Specify how yous want your video to start during your presentation

2. Nether Video Tools, on the Playback tab, in the Video Options group, in the Start list, do one of the following:

3. • To play your video when the slide containing the video appears in Slide Show view, select Automatically.

   • To control when you desire to beginning the video by clicking the mouse, select On Click. (Then, when you're presenting in Slide Show view, you'll simply click the video frame when yous're set to play the video.)

     Tip:While a video is playing, you tin pause information technology past clicking it. To resume playing the video, click information technology again.

Play a video total screen

You can play a video so that it fills the entire slide (screen) when you deliver your presentation. Depending on the resolution of your original video file, it might appear distorted when you overstate information technology. Always preview your video earlier yous include it in your presentation so that if the video appears distorted or blurry, yous can undo the full screen option.

If yous set the video to be displayed full screen and it is also ready to start automatically, you can elevate the video frame off the slide into the gray area so that it will not be visible on the slide or wink briefly before the video goes to full screen.

1. In Normal view, click the video frame on the slide that yous desire to play full screen.

2. Under Video Tools, on the Playback tab, in the Video Options grouping, select the Play Full Screen check box.

Resize a video

If you don't want to play a motion picture full screen, you tin can resize it to the dimensions that y'all want.

1. In Normal view, select the video that you want to resize.

2. Practise one of the following:

   To suit the formatting:

   • Click a corner sizing handle until you see a two-headed arrow, and then drag to size the frame.

     

     • To keep the center of the video in the same identify, hold downward Ctrl while dragging. By default, this maintains the proportions (locks the attribute ratio) of the video equally yous drag.

     • Typically, most videos with a 640 x 480 resolution have a 4:3 aspect ratio, which is too the default aspect ratio for PowerPoint 2010 presentations. The default attribute ratio for presentations in PowerPoint 2013 and newer versions is 16:9. If the aspect ratios of the presentation and the video differ, your video volition await distorted when it plays.

   To specify precise peak-to-width proportions of a video:

   1. Under Video Tools, on the Format tab (PowerPoint 2013 or newer versions) or Options tab (PowerPoint 2010), in the Size grouping, click the Dialog Box Launcher .

   2. Click Size, and then nether Scale, select the Lock aspect ratio bank check box.

   3. Nether Size and rotate, enter sizes in the Height and Width boxes, or under Scale, in the Scale Peak and Scale Width boxes, enter the percentage of size that you want, relative to the video's original size.

      Tip:To prevent videos from skipping when they are played, under Calibration, select the Best scale for slide evidence bank check box.

Preview a video

• In Normal view, click the video frame.

• Click Play.

  There is also a Play selection in the Preview group, on both the Format and Playback tabs, under Video Tools.

Ready the book of a video

• Under Video Tools, on the Playback tab, in the Video Options group, click Book, and and so cull i of the following:

  • Depression

  • Medium

  • High

  • Mute

    Tip:You can too set the volume by using the volume slider on the play command bar.

Hide a video when not playing

While delivering your presentation, you can hide your video until you are set up to play it. However, yous should create an automatic or triggered animation to initiate playback or you will never see the video play during the slideshow. For more information about creating an automatic or triggered animation, see Breathing text or objects.

• Nether Video Tools, on the Playback tab, in the Video Options group, select the Hibernate While Not Playing check box.

Loop a video

To play your video repeatedly and continuously during your presentation, you lot can use the loop feature.

• Under Video Tools, on the Playback tab, in the Video Options group, select the Loop until Stopped cheque box.

Rewind a video afterward playing

To rewind your video after playing during your presentation, do the following:

• Under Video Tools, on the Playback tab, in the Video Options group, select the Rewind afterwards Playing check box.

Show the media controls

To show the media controls during your presentation, do the following:

• On the Slide Testify tab, in the Prepare group, select the Show Media Controls bank check box.

Important: Office 2007 is no longer supported. Upgrade to Microsoft 365 to work anywhere from whatsoever device and continue to receive back up.

Upgrade now

Resize a movie

If yous don't want to play a motion-picture show full screen, you can resize it to the dimensions that you want.

1. In Normal view, click the movie that you want to resize.

2. Under Movie Tools, on the Options tab, in the Size group, click the Dialog Box Launcher .

   

3. To maintain the movie'southward height-to-width proportions, click the Size tab, and then under Scale, select the Lock attribute ratio check box.

4. Do one of the post-obit:

   • Under Size and rotate, enter sizes in the Height and Width boxes.

   • Under Scale, in the Height and Width boxes, enter the percentage of size that you desire, relative to the movie's original size.

Tips

• To forbid movies from skipping when they are played, select the Best scale for slide show cheque box.

• You can as well resize a movie by dragging its borders. To go on the center of the movie in the same place, hold down CTRL while dragging. By default, Office PowerPoint 2007 maintains the proportions (locks the attribute ratio) of the movie as yous drag. Typically, most movies with a 640 x 480 resolution have a 4:iii aspect ratio, which is too the aspect ratio for most PowerPoint presentations. If the aspect ratios of the presentation and the motion-picture show differ, your pic will expect distorted when it plays.

Hibernate a picture show frame

Yous may desire to make a movie frame invisible to keep it from appearing during the presentation, and brand information technology disappear from the slide later the presentation. If you set this selection and the Play Full Screen pick, the movie will not appear to be on your slide at all (though you may see it wink on the slide before it plays total screen). To foreclose the brief wink, drag the movie frame off the slide.

Of import     If y'all drag the movie frame off the slide or hide the movie frame, you must set the movie to play automatically or by some other kind of command, such equally a trigger. A trigger is something on your slide, such as a picture, shape, button, paragraph of text, or text box, that initiates an activity when you click it.

1. In Normal view, click the moving picture frame on the slide.

2. Under Motion-picture show Tools, on the Options tab, in the Movie Options group, select the Hide During Bear witness check box.

   

Although the flick frame is e'er visible in Normal view, y'all can drag the movie frame off the slide to hibernate it.

Delay the starting time of a movie

You tin accommodate the settings for when a movie file plays. For example, you might want to start five seconds into the movie, rather than at the first of the movie.

1. In Normal view, click the movie frame on the slide.

2. On the Animations tab, in the Animations group, click Custom Animation.

   

3. In the Custom Animation job pane, click the arrow to the right of the selected movie, and so click Event Options.

   The flick icon, which looks similar to the symbol on the play button of a VCR or DVD player, appears above the trigger bar.

   

4. Click the Consequence tab, and and so under Start Playing, click From fourth dimension, and so enter the full number of seconds for the delay.

Rewind a flick after information technology plays

When you lot set a movie to rewind, it automatically goes back to the offset frame and stops subsequently playing once.

1. In Normal view, click the moving-picture show frame on the slide.

2. Under Flick Tools, on the Options tab, in the Moving picture Options grouping, select the Rewind Moving picture Later Playing check box.

   

Encounter Besides

Create a self-running presentation

Turn your presentation into a video

Add together and play sounds in a presentation

Set the timing and speed of a transition

Source: https://support.microsoft.com/en-us/office/set-the-play-options-for-a-video-in-your-presentation-f0d5b3f1-37ba-4a0d-9d94-f8e33cef29bf

Posted by: mooreheadsoread.blogspot.com

Share this post